Sonic Oil Filter AC Delco PF2257G

 

Ramps (Rhino Gear)

 

 

Small Sockets 6-19mm

 

25mm / 3/8” drive Socket

 

3/8” Socket Extension

 

Mobil 1 5W30 Dexos

 

 

 

http://www.gouldaero.com

When it comes to running CAD systems a gamer mouse can be a great choice to greatly improve productivity. I have been using an 11 button thunder bird mouse for around 2 years now both at home running Rhino 3D and at work running Unigraphics NX and just recently upgraded to the 18 button Venus model by Utech Smart. Both have the same basic user interface when it comes to customization.

It has 5 modes so that can expand what you can do even more. each mode can also be color coordinated so you know what one you are on.

 

 

• Built with gamers in mind: up to 16400 DPI, 12000 FPS, 1000 Hz polling rate, 30G acceleration, 100-150in/s cursor speed, and an Avago sensor. Omron micro switches provide crisp, firm clicks.
• 18 programmable buttons, 5 Savable memory profiles each with a distinct light color for quick identification, an 8-piece weight tuning set (2.4g x8), and over 16 million LED color options. The LED may be disabled as per your preference.
• Durable smooth TEFLON feet pads and contour body for ultimate gaming control. High-end features including 18 buttons, power button, breathing light in 5 colors modes and 12 side buttons
• Ergonomic Right Handed Design with Rubber Painting Surface that can keep your grip firm during gameplay. 6ft braided-fiber cable with gold-plated USB connector ensures greater durability.
• Special Setting Switch Button on the back side of the mouse let you take command with maximum efficiency; 18-Month Manufacturer’s Warranty.

An Ergonomic mouse pad is another great thing to get

This model by J&G modern computer accessories is a great find and works well with the Venus mouse.

 

Another video share from Curious Droid YouTube channel.

I probability had this covered when I went to ERAU but forgot it,  If Paul the CD host was the teacher I would of likely remembered it.

JSP ARC now has full length electrodes in conventional & combination packs.

Visit the main JSP ARC page on Amazon!

details:

conventional packs:

.040″ x 6.89″ 10 pack

1/16″ x 6.89″ 10 pack

3/32″ x 6.89″ 10 pack

 

Combination Packs:

5) .040″Ø & 5) 1/16″Ø

5) 1/16″Ø & 5) 3/32″Ø

4) .040″Ø, 3) 1/16″Ø & 3) 3/32″Ø

A great video I found on adding a cutting laser to a CNC router

More details on the build visit http://www.cncrouterbuild.com/buildpage17.html

And Laser: http://robots-everywhere.com/re_site_static/purchase/l-cheapo/

And for the YouTube channel: https://www.youtube.com/user/DesertFabworks/feed

I’m a fan of listing to many Podcasts, one of them is Ken Courtright’s today’s growth show.

In the episode below is one of the best arguments I’ve heard on why it’s important to hire interns at your company.

https://itunes.apple.com/us/podcast/ken-courtright-todays-growth-growing-business-today/id1073661677?mt=2#episodeGuid=https%3A%2F%2Fwww.podetize.com%2F%3Fp%3D46651

Found this on Pinterest, it’s a must share 😅

Looking for 50 Cal cans? click here

Looking for 30 Cal cans? click here

Makes great storage for volatile Lipo batteries & model rocket engines.

 

Some good up close in flight footage of a Crested Caracara just outside of Okeechobee FL.

Attention TIG welders working in tight spots:

JSP ARC is proud to announce their line of half length 2% Lanthanated (WL20) Tungsten electrodes.

Perfect for roll cages, motor cycle frames, & aircraft fuselages or anything else that uses a short torch setup. And with the 2% Lanthanated “blue band” it works great on inverter TIG machines, equally at home with AC & DC setups to give you coverage for Aluminum, Steel & Stainless.

They are available in 3 sizes & can be purchased & fulfilled by Amazon:

3/32” dia (12 count)

https://www.amazon.com/Welding-Tungsten-Electrodes-Lanthanated-12-Pack/dp/B07DBKMR68

 

1/16” dia (14 count)

https://www.amazon.com/Welding-Tungsten-Electrodes-Lanthanated-14-Pack/dp/B07DBGSDS7

.040” dia (18 count)

https://www.amazon.com/Welding-Tungsten-Electrodes-Lanthanated-18-Pack/dp/B07DBHD4JJ

No more cutting stock electrodes in half then looking for a place to store them. With JSP ARC’s half length electrodes your good to go passing the efficiency savings on to you.

 

 

 

 

Everyone’s favorite swede David Windestal (from https://rcexplorer.se) partnered with Jimmy Diresta to take a new spin on the utility knife. This knife is small, compact, uses standard blades and has flat parallel sides to keep cuts spot on.

For more info on the kick starter campaign see https://www.kickstarter.com/projects/1496249101/maker-knife-the-edc-pocket-tool-you-want-to-carry